Student residence 522 in Würzburg is located right next to the railway tracks.

REGUPOL vibration isolation

For machines and building foundations

REGUPOL vibration

For vibration isolation and structure-borne sound decoupling

The building authority approved REGUPOL vibration range offers a portfolio of six different types, each designed for a specific load range. This creates many possibilities to implement an isolation concept for projects in the field of building services and HVAC equipment, machines, pools and gyms, as well as vibration protection for buildings, especially those in close proximity to rail infrastructure. Our team is by your side to assist you in product selection, planning, design, and  installation.

REGUPOL vibration 300

The approved material REGUPOL vibration 300 is used for the load range up to 0.05 N/mm². Depending on load and material thickness, natural frequencies…

REGUPOL vibration 450

The approved material REGUPOL vibration 450 is used in the load range up to 0.12 N/mm². Depending on load and material thickness, natural frequencies…

REGUPOL vibration 480

The approved material REGUPOL vibration 480 is used in the load range up to 0.15 N/mm². Depending on load and material thickness, natural frequencies…

REGUPOL vibration 550

The approved material REGUPOL vibration 550 is used in the load range up to 0.30 N/mm². Depending on load and material thickness, natural frequencies…

REGUPOL vibration 800

The approved material REGUPOL vibration 800 is used in the load range up to 0.80 N/mm². Depending on load and material thickness, natural frequencies…

REGUPOL vibration 1000

The approved material REGUPOL vibration 1000 is used in the load range up to 1.50 N/mm². Depending on load and material thickness, natural frequencies…

REGUPOL vibration range

The REGUPOL vibration series is made of  rubber fibers, granules, and polyurethane. The material is extremely resilient and durable. REGUPOL vibration has been used successfully worldwide for vibration isolation and structure-borne sound decoupling of machinery and vibration protection in buildings since the early 1990s. Even after decades of use, its properties only change marginally. 

The REGUPOL vibration series has a wide load range and provides a constant natural frequency. Each material type is best suited for its specified load range. Exceeding the maximum load limit leads to progressive spring characteristics, but not to material failure. In face, the rated value for maximum load capacity is 150% to 200% the specified limit. 

Bookmarks
Contact